Most people will have such a question: now many businesses are to promote their products using the polishing process, but most of them are not clear in the end what is the polishing process?
         In fact, as the name suggests is the product use polishing equipment and polishing materials on the surface of the product specific process. After polishing the product has high brightness and high brightness.
         Now the technology is divided into: (a roller polishing machine, centrifugal polishing machine, magnetic polishing machine, vibration polishing machine) mechanical polishing, electrolytic polishing, chemical polishing,
         The mechanical polishing and the principle of the mechanical polishing of the roller polishing machine, the centrifugal polishing machine, the magnetic polishing machine and the vibration polishing machine:
        The method of roller polishing is often used in the production of large quantities of bearing steel balls. When a large number of steel balls, grinding fluid and abrasive are placed in the container, the machine starts, so that the surface of the cylinder can be randomly rolled in the cylinder to achieve the purpose of removing the surface convex front and reducing the surface roughness,
Can be removed about 0.01 mm margin. When the fine cast in the barrel into the steel ball and the polishing abrasive, luster agent, once again, the corresponding time to the corresponding time can be bright bright surface.
         Precision scale of polishing is to transform and leaching of machined surface in polishing liquid, slurry by particle size for W5 ~ w0.5 of chromium oxide powder and emulsion mixing.
        Polishing wheel the material of thanksgiving after degreasing treatment of wood or special fine felt made, its trajectory for uniform dense mesh, polishing the surface rough degree greater than ra0.01 micron, under a magnification of 40 times amplification is not observed any surface defects.
        Mechanical polishing is performed on a special polishing machine, polishing, grinding and rolling effect to eliminate the wear scar.
Modification of the surface of the workpiece by means of flexible polishing tools and abrasive particles or other polishing media. Polishing can not improve the accuracy of the size of the workpiece or geometric accuracy, but to get a smooth surface or specular gloss for the purpose,
        Added to the corresponding polishing fluid may make the metal surface quickly recover more than the original luster, and will not leave any scars.
        Principle and process of electrolytic polishing:
        The principle of electrolytic polishing of stainless steel is generally accepted as the theory of mucosa. The theory is that the formation of phosphate film on the surface of the metal ion and the polishing liquid is absorbed on the surface of the workpiece, which is thin in the bulge,
        Recess is thick, raised at high current density and solubility, flow with the mucosa, bump is constantly changing, rough surface gradually by the leveling process.
        Electrolytic polishing process: in addition to the oil - washing - rust - washing - - and - - electrolytic polishing washing washing - passivation - packaging
       Chemical polishing:
       Chemical polishing needle for polishing the requirements of the occasion, need to heat, and now the technology, if it is to be able to use more than three kinds of polishing is not to use chemical polishing method, because the chemical polishing effect is poor, comprehensive cost is higher.